The first rule of embroidery digitizing services is that you must choose small text. It is especially difficult to digitize small letters because the stitch widths are so small. Also, the embroidery will lose a lot of detail. Therefore, it is important to make a list of the products you want to be embroidered.
Below are the 5 Must-Follow Small Text Rules for Choosing Embroidery Digitizing Services;
- Use sans serif fonts:
These fonts have fewer decorative flourishes and are better suited to embroidery. Serif fonts are difficult to make look good in small sizes. — Use contrasting colours in the thread. For example, grey or white text would look great in navy. These are just a few of the many rules for small text in embroidery.
- Be Very Careful With the Fonts and Colors:
The first rule of embroidery digitizing services is that the fonts used for small text must be at least 0.25″ tall. Depending on the type of fabric, this can be even smaller, but 0.25″ is the minimum. Always test the fonts in different sizes so you can choose the right ones.
- Provide the Correct File Format for your Embroidery.
Vector-based EPS files are safest to provide, although most companies can handle almost any file type. The larger the file, the better the quality. Ensure that all text is outlined or curves. You can even embed PMS colour codes in the file. However, small text lettering requires a lot more care and attention than large fonts.
- Ensure that the Size of the Text is Large Enough to be Read Easily:
Regardless of font style, ensure the font height is four or five millimetres. This allows the embroidery service to see the text even in smaller sizes. The size of the font will affect the size of the finished product. It is important that all small letters are legible. If a stitched text is too small, it may get lost in the seams and detract from the overall quality.
- A Letter Size Should be Large Enough to be Readable:
This rule applies to all types of lettering, including capital and lowercase letters. For example, the font must be at least four millimetres taller than the text should be. It is also crucial to specify the type of embroidery needle and thread. As long as the font is small, it should be easy to read and comfortable to read.
The size of the letters should be large enough to read. Depending on the type of letter, the font should be at least four millimetres tall. The letters should be at least four millimetres high, while the height of the capital letters should be at least five millimetres tall. Ensure that the letter sizes are appropriate for the type of fabric used.
The size of the text is also important. If the text is too small, it will look weird when embroidered. It is important to have a high-quality file for embroidery. When digitizing small text, you should be able to see it easily. For example, if the font is too large, it will look unprofessional. A font with large size will not be readable.
Apart from font size, the fabric of the text is also essential. Your design should be appropriate for the fabric. For example, if the text is too large, the text should be at least 20PT. If it is too small, it will appear messy. If the fabric is too thick, the text will look distorted and will protrude on the edges. It is also important to pay attention to the stitching density.
Another important rule for embroidery digitization is the size of the text. If it is too small, the stitches will appear too small. When the text is too large, it will look tacky and unprofessional. A wrong stitch size will look ill and make the design look unprofessional. The best way to avoid this is to hire an embroidery digitizing service with a good reputation.
No Comments